HP Slate 500 Step 5 — Install the HP PSC 500 Software, Installing the HP PSC 500 Software

Step 5 — Install the HP PSC 500 Software

Now you need to install software so that the HP PSC 500 can work with your computer for printing and scanning.

NOTE	If you are installing the software on a Windows NT 4.0 computer, you must have
	Service Pack 3 or higher installed.
	If you are using a dual-boot (Windows 95/98 and NT 4.0 on the same computer), see
	the Readme file on the HP PSC 500 CD-ROM for important information.

Installing the HP PSC 500 Software

1Turn on your computer, but do not turn on your HP PSC 500.

2If you see either of the following windows, click Cancel or press Esc on your keyboard. Otherwise, skip to the next step.

Click Cancel. Click Cancel.

CAUTION For simple error-free installation, use the procedures in this guide to install your HP PSC 500 software for the first time.

1-10Setting Up Your HP PSC 500