HP Slate 500 Setting Up Your HP PSC, Step 1 — Unpack Your HP PSC

Setting Up Your	1
HP PSC 500

NOTE	If available, your scanner works best with your computer’s parallel port set to ECP
	mode. Refer to the “Read about ECP” document, which is available after you install
	your software or refer to the user’s guide that came with your computer.

Setting Up Your HP PSC 500

Follow the steps in the order shown.

IMPORTANT Do not turn on your HP PSC 500 until the installation program instructs you.

Step 1 — Unpack Your HP PSC 500

1Remove the cardboard tray containing the accessory items.

2Rest the box on its side, and pull out your HP PSC 500.

HP PSC 500 Setup Guide 1-1