4Push the IN tray back toward the unit until it stops, and lower the top (OUT) tray if you raised it before inserting paper.

For information about loading specific paper types, see Chapter 2, “All About Paper,” of the HP PSC 500 Basic Operations Guide.

For information about paper tray capacities, see Chapter 6, “Technical

Information,” of the HP PSC 500 Customer Care Guide.

Step 3 — Install Print Cartridges

1Locate the print-cartridge access door on the front of the HP PSC 500, just above the OUT tray.

2Pull the latch on the print-cartridge access door toward you and raise it up until it is fully extended.

3Remove the cardboard insert from the inside of the unit.

TIP Save the packaging materials in case you ever need to move or ship your HP PSC 500.

The print-cartridge carriage will be in the middle of the access area. The carriage contains two slots designed to hold one color print cartridge and one black print cartridge. You should have received one of each type of cartridge with your new HP PSC 500.

4Raise both latches on the carriage.

1-4Setting Up Your HP PSC 500