13If prompted, restart your computer.

If you plan on scanning text to edit, make sure you install the Readiris OCR software. Refer to the section,“Installing OCR Software.”

To take the tour at any time, do the following:

1Insert the HP PSC 500 CD-ROM into your computer’s CD-ROM drive.

2From the HP PSC 500 Essentials menu, click Run Product Tour.

TIP You can also access the tour from the Welcome tab on the toolbox.

Registering Your HP PSC 500

The first time you restart your computer after installing the HP PSC 500 software, you will be invited to register your unit electronically. The information you provide to HP is confidential and is used to help us improve our products.

Installing OCR Software

To scan text to edit, you must install the Readiris OCR software program.

1Insert the HP PSC 500 CD-ROM into your computer’s hard drive.

2From the HP PSC 500 Essentials menu, click Readiris OCR.

3Follow the directions in the Readiris software installation window.

Installing Third-Party Programs

Your HP PSC 500 may include additional third-party programs. Install these programs to enhance your HP PSC 500’s capabilities.

HP PSC 500 Setup Guide 1-15