Changing the startup mode, Enter Y at the prompt | HP E5500-48-POE

................................................................................

................................................................................

................................................................................

................................................................................

................................................................................

................................................................................

...........................................OK!

User interface aux0 is available.

Press ENTER to get started.

Press Enter at the prompt, and you can configure the switch when the prompt <HP> appears.

Changing the startup mode

The system by default starts up in fast mode. To change to the full startup mode, press Ctrl + B within one second to access the Boot menu:

BOOT MENU

1.Download application file to flash

2.Select application file to boot

3.Display all files in flash

4.Delete file from flash

5.Modify bootrom password

6.Enter bootrom upgrade menu

7.Skip current configuration file

8.Set bootrom password recovery

9.Set switch startup mode

0. Reboot

Enter your choice(0-9):

Enter 9 to change the startup mode.

The current mode is fast startup mode!

Are you sure you want to change it to full startup mode? Yes or No(Y/N)

Enter Y at the prompt.

Setting startup mode...done!

BOOT MENU

1.Download application file to flash

2.Select application file to boot

3.Display all files in flash

4.Delete file from flash

5.Modify bootrom password

6.Enter bootrom upgrade menu

7.Skip current configuration file

50

Image 55

HP E5500-48-POE, 5120 SI, 5120 48G Changing the startup mode, Enter 9 to change the startup mode, Enter Y at the prompt

Contents

HP 5120 EI & 5120 SI Switch Series Page Contents Page Iii Type Product code HP description Alias Models in the HP 5120 EI Switch SeriesModels in the HP 5120 SI Switch Series Product overview 5120-24G EI 2 slots/5120-24G EI TAA 2 slots panel views Regulatory Model Numbers in the HP 5120 8G SI Switch Series 5120-48G EI 2 slots/5120-48G EI TAA 2 slots panel views 5120-24G EI panel views 5120-48G EI panel views 5120-48G EI switch does not support interface cards Front panel Front panel 5120-16G SI panel views 5120-8G SI panel views 5120-48G SI panel views 5120-24G SI panel views 5120-8G-PoE+ SI panel views 5120-8G-PPoE+ SI panel views 5120-24G-PPoE+ SI panel views 5120-24G-PoE+ SI panel views Temperature/humidity Preparing for installationSafety recommendations Examining the installation site Harmful gas limits in the equipment room CleannessLaser safety Dust concentration limit in the equipment room Installation tools Hardware installation flow Installing the switch Installation methods Installing a 5120 EI switch in a 19-inch rackMounting brackets Mounting bracket kit shipped with the 5120 EI switches Rack-mounting by using only front mounting bracketsChassis Front mounting brackets Rear mounting brackets Attach the front mounting brackets to the chassis Attach the front mounting brackets to the rack Rack-mounting by using front and rear mounting brackets Attach the rear mounting brackets to a rack Mount the switch in the rack Attach the front brackets to the rack Installing a 5120 SI switch in a 19-inch rack To attach the mounting brackets to the switch chassis Attaching the mounting brackets to the switch chassisChassis Bracket view Mounting position Front mounting position 5120-16G SI/5120-24G SI Front mounting position 5120-8G-PoE+ SI/5120-8G-PPoE+ SI Rack-mounting the switch Mount the switch in a rack 5120-16G SI Mounting the switch to a wall Mounting the switch on a workbench Model Hole distance Installation procedureIntroduction to wall anchor kit Models supporting wall mounting Introduction to magnetic mounting kit Mounting the switch through magnet mounting Magnet mounting kit Grounding the switch with a grounding strip Grounding the switchPage Make a grounding cable connector Ground through the PE wire of the AC power cord Grounding the switch by using the AC power cord Connecting the AC power cord Connecting the power cord Connect the AC power cord to the 5120-48G EI switch Connecting the switch to a +12 VDC output RPS Connect the RPS cable to the -52 to -55 RPS receptacle Connecting the switch to a -52 to -55 VDC output RPS Remove the filler panel over an interface card slot Installing an interface card Removing an interface card Installing/removing a dedicated CX4/SFP+ cable Removing a dedicated CX4/SFP+ cable Verifying the installation Connection procedure Accessing the switch for the first timeSetting up the configuration environment Connecting the console cable Connection description Setting terminal parameters Set the serial port parameters Set the serial port used by the HyperTerminal connection HyperTerminal window Verification before power-on Powering on the switchPowering on the switch Description Boot menu options Enter 9 to change the startup mode Changing the startup modeEnter Y at the prompt Finished User interface aux0 is available Press Enter to get started IRF fabric setup flowchart Setting up an IRF fabricTo set up an IRF fabric Step Description Planning IRF fabric setupPlanning IRF fabric size and the installation site Identifying the master switch and planning IRF member IDs 5120 EI IRF fabric in daisy chain topology Planning IRF topology and connections 5120 SI IRF fabric in daisy chain topology Identifying physical IRF ports on the member switches Planning the cabling scheme Switch chassis Candidate physical Requirements IRF portsPhysical IRF port requirements Page Shows the IRF fabric topology Configuring basic IRF settings To do … Use the command… Connecting the physical IRF portsAccessing the IRF fabric to verify the configuration Display and maintain IRF configuration and running status Console login password loss Maintenance and troubleshootingPassword loss Power supply failure AC input Mark State Fan failure only for the 5120 EI switchesConfiguration terminal problems LED behaviors that identify a fan failure Chassis Dimensions H × W × D Weight Appendix a Technical specificationsPhysical specifications Chassis dimensions and weights Chassis Operating temperature Relative humidity Environmental specificationsPower specifications Power input types RPS DC input voltage specifications and RPS compatibility AC input voltage specificationsPower consumption specifications for non-PoE switches Cooling system Power consumption specifications for PoE switches Chassis Fixed fans Appendix B FRUs and compatibility matrixes Interface cards only for the 5120 EI switches GE SFP+ transceiver modules GE SFP transceiver modules Product code Cable description Cable length SFP+ cables GE XFP transceiver modules Product code Cable description Connector type Cable lengthCX4 cables UTP/STP Page 10/100/1000Base-T Ethernet port Appendix C Ports and LEDsPorts Console port Combo interface only available on the 5120 EI switches LEDs for the 5120 EI switchesSystem status LED RPS status LED Port mode LEDSeven-segment LED Seven-segment LED description 10/100/1000Base-T Ethernet port LED Port mode LED Mode Port LED status Description StatusSFP port LED Power LED LEDs for the 5120 SI switchesInterface card status LED Ethernet port LED description 5120-48G SI RPS status LED descriptionStatus Description Ethernet port LEDs description 5120-16G SI/5120-24G SI Port mode LED Mode Port LED 1000Base-X SFP port LEDs description 1000Base-X SFP port LED Contacting HP Support and other resourcesRelated information Convention Description ConventionsConvention Description Network topology icons Index Verifying the installation,43