HP 530 Computer feet, Memory module, Description Spare part number Rubber Feet Kit 438557-001

Computer feet

Description	Spare part number
Rubber Feet Kit	438557-001

The computer feet are adhesive-backed rubber pads. There are 8 rubber feet. The feet attach to the base enclosure in the locations illustrated below.

Memory module

Description	Spare part number
1024-MB, 667-MHz, PC2-5300, 1-DIMM	409060-001
512-MB, 667-MHz, PC2-5300, 1-DIMM	447518-001
256-MB, 667-MHz, PC2-5300, 1-DIMM	447517-001

Before removing the memory module, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see Battery on page 32).

Remove the external memory module:

1. Position the computer with the rear panel toward you.

2. Loosen the Phillips PM2.5×6.0 screw (1) that secures the memory/WLAN module compartment cover to the computer.

Component replacement procedures 35