![](/images/new-backgrounds/1270219/270219159x1.webp)
Security menu
Select | To do this | |
|
| |
Setup password | Enter, change, or delete a setup password. | |
|
| |
Enter, change, or delete a | ||
|
|
|
Password options | ● | Enable/disable stringent security. |
| ● | Enable/disable password requirement on computer restart. |
|
|
|
DriveLock passwords | ● | Enable/disable DriveLock on any computer hard drive and on optional MultiBay hard |
|
| drives. |
| ● | Change a DriveLock user password or master password. |
| NOTE: DriveLock settings are accessible only when you enter Computer Setup by turning on | |
| (not restarting) the computer. | |
|
| |
Smart Card security | Enable/disable support for smart card and Java™ Card | |
| NOTE: | |
| smart card readers. | |
| NOTE: You must have an administrator password to change this setting. | |
|
| |
TPM Embedded Security | Enable/disable support for Trusted Platform Module (TPM) Embedded Security, which protects | |
| the computer from unauthorized access to owner functions available in Embedded Security for | |
| ProtectTools. For more information, refer to the ProtectTools software Help. | |
| NOTE: You must have a setup password to change this setting. | |
|
| |
System IDs | Enter | |
|
| |
Disk Sanitizer | Run Disk Sanitizer to destroy all existing data on the primary hard drive. The following options | |
| are available: | |
| ● | Fast: Runs the Disk Sanitizer erase cycle once. |
| ● | Optimum: Runs the Disk Sanitizer erase cycle 3 times. |
| ● | Custom: Allows you to select the desired number of Disk Sanitizer erase cycles from a list. |
| CAUTION: If you run Disk Sanitizer, the data on the primary hard drive is destroyed | |
| permanently. | |
|
|
|
Diagnostics menu
Select | To do this |
|
|
Hard Drive | Run a comprehensive |
| drive. |
|
|
Memory Check | Run a comprehensive check on system memory. |
|
|
Startup Check (select models | Verify the system components needed for starting the computer. |
only) |
|
|
|
72 Chapter 5 Computer Setup