Display assembly
Description | Spare part number |
|
|
capability (includes wireless antenna transceivers and cables) |
|
|
|
capability |
|
|
|
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 32).
5. Remove the memory/WLAN module compartment cover (see Memory module on page 35) and disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 37).
6. Remove the following components:
a. Switch cover (see Switch cover on page 41)
b. Keyboard (see Keyboard on page 43)
Remove the display assembly:
1. Close the computer and turn it upside down, with the rear panel toward you.
2. Remove the two Phillips PM2.0×7.0 screws that secure the display assembly to the computer.
3. Turn the computer
4. Open the computer until the display assembly is in an upright position.
Component replacement procedures 47
