HP Scanjet 4500c, 5500c connect the TMA

connect the TMA

If your scanner has a transparent materials adapter (TMA), it allows you to scan 35 mm slides or negatives.

1Disconnect the power cable from the scanner.

2On the back of the scanner, find the round TMA port:

–On the HP Scanjet 4500c and 5550c series scanners, the TMA port is the second port from the left.

–On the HP Scanjet 4570c and 5500c series scanners, the TMA port is the second port from the right.

3Holding the TMA cable by its free end, align the connector so the arrow is on the top side.

4Gently insert the connector into the TMA port.

5Reconnect the power cable.

TMA port

5

install the scanner