
FDR_RG.book Page 18 Wednesday, July 31, 2002 9:38 AM
english
troubleshooting: ethernet
Use the information in this section if you have problems setting up your HP printer with its
what is the problem?
The ethernet cable is connected to the printer, but the Link light is off.
possible causes...
The printer is not powered on.
The ethernet hub or router is not powered on or is malfunctioning.
You are not using a
The ethernet cable is not securely connected.
to solve the problem...
Press the Power button to power on the printer.
Verify that the hub or router is powered on. Consult the documentation that came with the hub or router to verify that it is working properly.
Use a
Verify that the cable is securely connected to the printer and hub or router. The cable snaps into place when the connection is secure.
The ethernet cable is broken. |
| Use a different ethernet cable to connect the |
| ||
|
| printer to the network. |
18