HP 6310, 6310xi 15 Choose ONE connection type (A or B), A: USB Connection - Do not connect yet, B: Ethernet (Wired) Network

1 12

Use this connection type if you want to connect the device directly to one computer. (Do not connect until the software instructs you to.)

Equipment needed: USB cable.

For a USB connection, go to Section A (page 9) for instructions.

Use this connection type if you want an Ethernet cable connection between the device and your network.

Equipment needed: hub/router/switch and Ethernet cable.

For an Ethernet cable connection, go to Section B (page 11) for instructions.

For more information on how to set up a network, go to www.hp.com/support, enter HP Ofﬁcejet 6300, and search for Network Setup.

6 • HP All-in-One

Contents

cable until you are asked to do so 2 Discard all tape and orange lock 3 Locate components Attach the control panel faceplate (if not attached) Attach paper trays and load paper Connect the power cord Connect the phone cord Press the On button 9 Open the print cartridge door Remove tape from both cartridges Insert the tri-colorprint cartridge Insert the black print cartridge 13 Align the print cartridges 14 Turn on your computer 15 Choose ONE connection type (A or B) A: USB Connection - Do not connect yet B: Ethernet (Wired) Network Section A: USB Connection A1Choose the correct CD A2Connect the USB cable A3Congratulations! See the last page to try out your HP All-in-One Section B: Ethernet (wired) network B1 Connect the Ethernet cable B2 Choose the correct CD B2 B2 Continued: B3 Install software on additional computers B4 Congratulations! See the last page to try out your HP All-in-One Troubleshooting Test the features