HP 6310, 6310xi A2Connect the USB cable, A3Congratulations! See the last page to try out your HP All-in-One

1 12

Windows Users:

aFollow the onscreen instructions until you see the prompt to connect the USB cable. (This may take several minutes.)

Once the prompt appears, connect the USB cable to the port on the back of the HP All-in-One, and then to any USB port on your computer.

bFollow the onscreen instructions. Complete the Fax Setup Wizard and Sign Up Now screens.

Mac Users:

aConnect the USB cable from your computer to the USB port on the back of the device.

bInsert the HP All-in-One CD. Double-click the HP All-in-One Installer icon.

cMake sure you complete all screens, including the Setup Assistant.

8 • HP All-in-One

Contents

cable until you are asked to do so 2 Discard all tape and orange lock 3 Locate components Attach the control panel faceplate (if not attached) Attach paper trays and load paper Connect the power cord Connect the phone cord Press the On button 9 Open the print cartridge door Remove tape from both cartridges Insert the tri-colorprint cartridge Insert the black print cartridge 13 Align the print cartridges 14 Turn on your computer 15 Choose ONE connection type (A or B) A: USB Connection - Do not connect yet B: Ethernet (Wired) Network Section A: USB Connection A1Choose the correct CD A2Connect the USB cable A3Congratulations! See the last page to try out your HP All-in-One Section B: Ethernet (wired) network B1 Connect the Ethernet cable B2 Choose the correct CD B2 B2 Continued: B3 Install software on additional computers B4 Congratulations! See the last page to try out your HP All-in-One Troubleshooting Test the features