Manuals / Brands / Computer Equipment / All in One Printer / HP / Computer Equipment / All in One Printer

HP 6310, 6310xi Section B: Ethernet (wired) network, B1 Connect the Ethernet cable, B2 Choose the correct CD

1 12

Download 12 pages, 5.75 Mb

Section B: Ethernet (wired) network

B1 Connect the Ethernet cable

a Remove the yellow plug from the back of the device.

b Connect one end of the Ethernet cable to the Ethernet port on the back of the device.

c Connect the other end of the Ethernet cable to the hub/ router/switch. If the cable is not long enough, you can purchase a longer cable.

IMPORTANT: Do not connect the Ethernet cable to a cable modem. You must have a working network. If you already connected the USB cable, do not connect the Ethernet cable.

B2 Choose the correct CD

Windows Users:	Mac Users:
a Insert the green HP All-in-One Windows CD.	a Insert the gray HP All-in-One Mac CD.

HP All-in-One • 9

Contents

cable until you are asked to do so 2 Discard all tape and orange lock 3 Locate components Attach the control panel faceplate (if not attached) Attach paper trays and load paper Connect the power cord Connect the phone cord Press the On button 9 Open the print cartridge door Remove tape from both cartridges Insert the tri-colorprint cartridge Insert the black print cartridge 13 Align the print cartridges 14 Turn on your computer 15 Choose ONE connection type (A or B) A: USB Connection - Do not connect yet B: Ethernet (Wired) Network Section A: USB Connection A1Choose the correct CD A2Connect the USB cable A3Congratulations! See the last page to try out your HP All-in-One Section B: Ethernet (wired) network B1 Connect the Ethernet cable B2 Choose the correct CD B2 B2 Continued: B3 Install software on additional computers B4 Congratulations! See the last page to try out your HP All-in-One Troubleshooting Test the features