HP 640 Fax 3 Additional features, Set rings to answer

Set rings to answer

3 Additional features

This chapter contains information on additional features you may want to set or change for your HP Fax.

•Rings to answer: Sets the number of rings before the HP Fax answers the phone.

•Caller ID: If you subscribe to Caller ID through your local phone company, you can use it with your HP Fax.

•Block Junk Faxes: In conjunction with Caller ID, you can block certain numbers from sending you a fax.

•Favorites

•Image TCR

•Distinctive Ring

•Answer/Receive mode: Determines how the HP Fax responds to incoming calls.

	1 The “arrow buttons” located at the left
	and right of OK button on the control
	panel are designated by	in the
1	instructions.

Set rings to answer

You can select the number of rings that will occur before the fax answers an incoming call.

NOTE: If you are using your machine as both a telephone and a fax machine, we suggest you set the ring count to at least 4 to give you time to answer.

1.Press Menu repeatedly until BASIC FAX displays and press OK.

2. Press until Rings to Answer displays and press OK.

3.Enter the number of rings you want (2–7) and press OK.

The HP Fax rings the set number of times and then answers. It then produces a different sounding ring to alert you to which type of call is incoming.

•The additional ring may occur once for a fax call

•The additional ring occurs 5 times for a voice call. After the 5 additional rings, the answering machine will answer.

Additional features 23