HP Jornada 680, 680 E Press the, Press the, To remove a CompactFlash Card, To install a CompactFlash Card

130 HP Jornada 680/680e User’s Guide

To install a CompactFlash Card

1.Press the latch-bar located at the opening of the expansion module with your finger. The expansion module will spring open.

2.Insert the CompactFlash Card by sliding it into the expansion module along the glide rails.

3.Close the expansion module by pushing down until it is flush with the underside of the unit. The expan- sion module should lock in place. You will be able to see the top edge of the card through the slit between the expansion module and the unit.

If you have difficulty opening the expansion module, use your thumbs to apply pressure at the base of the expansion module (near the backup battery compartment) while you press the latch-bar.

To remove a CompactFlash Card

1.Press the latch-bar located at the opening of the expansion module with your finger. The expansion module will spring open.

2.Remove the CompactFlash Card. Insert your finger- nail into the notch on the card to pull the card from the unit.