PROJECTOR SETTINGSSelect and press to activate projector settings. The projector settings menu provides the following options:

AUTO SOURCESelect Off (the default) to lock the current input signal. If you press the Source button when the Auto Source mode is set to Off, you can manually select the input signal. Select On to auto detect the available input signals. If you press the Source button when the projector is on, it automatically finds the next available input signal.

AUTO KEYSTONESelect On to automatically adjust image distortion caused by tilting the projector.

HORIZONTAL KEYSTONEUse and to adjust the image horizontal keystone.

VERTICAL KEYSTONEUse and to adjust the image vertical keystone.

PROJECTOR MODEAllows you to select the projector mode, depending upon how the projector is mounted.

•Rear Projection-Desktop — The projector reverses the image so that you can project from behind a translucent screen.

•Rear Projection-Ceiling Mount — The projector reverses and turns the image upside down. You can project from behind a translucent screen with a ceiling-mounted projection.

•Front Projection-Desktop — This is the default option.

•Front Projection-Ceiling Mount — The projector turns the image upside down for ceiling-mounted projection.

SPEAKERSelect On to enable the speaker. Select Off to the disable speaker.

CLOSED CAPTIONSelect On to enable close caption and activate the closed caption menu. Select appropriate closed caption options: CC1, CC2, CC3, and CC4.

Using Your Projector

 

45