
aUse
and 



buttons to select the option.
bUse
and 



buttons to set the value.
cAfter the setup is complete, press the
button to exit.
3.After the IP Address, Subnet Mask, Gateway, and DNS is set up, select Store and press
button to store the settings.
4.If you select Store without pressing the Enter button, the system will keep the original settings.
RESET—Press
to reset wireless configuration.
MENU SETTINGS—Select and press to activate the menu settings. The menu settings consists of the following options:
MENU POSITION—Allows you to change the position of the OSD menu on the screen.
MENU TIMEOUT—Allows you to adjust the time for an OSD timeout. By default, the OSD disappears after 20 seconds of non-activity.
MENU LOCK—Select On to enable the Menu Lock and hide the OSD menu. Select Off to disable the Menu Lock. If you want to disable the Menu Lock function and have the OSD disappear, press the Menu button on the control panel or remote control for 15 seconds, and then disable the function.
MENU TRANSPARENCY—Select to change the transparency level of the OSD background.
PASSWORD—When Password Protect is enabled, a Password Protect screen requesting you to enter a password will be displayed when the power plug is inserted into the electrical output and the power for the projector is first turned on. By default, this function is disabled. You can enable this feature by selecting Enabled. If the password has been set before, key in the password first and select the function. This password security feature will