
Projector Upgrade
Use the Projector Upgrade page to update your projector’s firmware.
NOTE: Please disable and enable wireless/network using the OSD to restart the network card for the projector after firmware upgrade is successful.
NOTE: Ensure the wireless standby mode is turn on (default is off), follow these
steps: Advanced Settings
To start the firmware update, follow these steps:
1Plug in the power cord and the projector will enter standby mode.
2Connect the LAN cable to the projector and your computer.
3Open your Internet browser and then enter the IP address (default IP address is 192.168.100.10).
4At Projector Upgrade web page, press Browse to select the file to update.
Using Your Projector |
| 89 |
|