Enable Wireless on the Projector

In order to use your projector wirelessly, you need to complete the steps below:

1Install the optional wireless dongle. See "Installing the Optional Wireless Dongle" on page 11.

2Connect the power cable to the wall outlet and press the power button.

3Press the Menu button on your projector control panel or remote control.

NOTE: Use , , and buttons to navigate and to select.

4The wireless connection default is Enabled. See "Wireless Settings" on page 48.

5Access the INPUT SOURCE menu, select Wireless/USB and then select Wireless Display on the sub-menu. See "INPUT SOURCE WIRELESS/USB" on page 38.

56Using Your Projector