LAN SETTINGS—Select and press to activate LAN settings. The LAN settings menu provides the following options:
WIRELESS AND LAN—Select Enabled to active the Wireless and LAN function.
DHCP—If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be acquired when you select DHCP On. If DHCP is Off, manually set the IP Address, Subnet Mask, and Gateway. Use 
and 
to select the number of IP address, Subnet Mask, and Gateway. Key in enter to confirm each number and then use 
and 
to set the next item.
IP ADDRESS—Automatically or manually assigns the IP address to the projector connected to the network.
SUBNET MASK—Configure the Subnet Mask of the network connection.
GATEWAY—Check the Gateway address with your network/system administrator if you configure it manually.
DNS—Check the DNS Server IP address with your network/system administrator if you configure it manually.
STORE—Press | to save the changes made in network configuration |
settings. | |
NOTE:
1.Use 
and 
buttons to select IP Address, Subnet Mask, Gateway, DNS, and Store.
2. Press the button to enter IP Address, Subnet Mask, Gateway, or
DNS to set the value. (The selected option is highlighted in blue)
aUse 
and 
buttons to select the option.
bUse 
and 
buttons to set the value.
cAfter the setup is complete, press the 
button to exit.
