3Access the Input Source menu, select the Wireless/USB and then select the Wireless Display on the sub-menu.

The Wireless Guide Screen shown below appears:

4Take note of the LOGIN CODE, NETWORK NAME (SSID), and IP ADDRESS. You will need these information to log in later.

Install the Wireless Application Software on Your Computer

5"Wireless Application Software" is required if the Wireless or LAN is used for the Audio Projection set-up. Please download and install the software the first time you use Audio Projection. If it is already installed, skip Step 5 - 6.

NOTE: You only need to install the "Wireless Application Software" once.

6Wireless Application Software download and install steps refer to steps 7 to 12 of the "Wireless Networking Installation" on page 55.

Using Your Projector

 

73