3.After the IP Address, Subnet Mask, Gateway, and DNS is set up, select Store and press button to store the settings.

4.If you select Store without pressing the Enter button, the system will keep the original settings.

RESETPress to reset network configuration.

WIRELESS SETTINGSSelect and press to activate wireless settings. The wireless settings menu provides the following options:

WIRELESSDefault option is Connected. Select Disconnected to disable the wireless connection.

NOTE: It is recommended to use the default settings for Wireless Connect.

DHCP SERVERAllows you to enable DHCP server of the wireless.

START IP ADDRESSAutomatically or manually assigns the Start IP address of the DHCP server to the projector connected to the wireless.

END IP ADDRESSAutomatically or manually assigns the End IP address of the DHCP server to the projector connected to the wireless.

SUBNET MASKConfigure the Subnet Mask of the wireless connection.

GATEWAYCheck the Gateway address with your network/system administrator if you configure it manually.

DNS—Check the DNS Server IP address with your network/system administrator if you configure it manually.

STOREPress

to save the changes made in wireless configuration

settings.

 

NOTE:

1.Use and buttons to select IP Address, Subnet Mask, Gateway, DNS, and Store.

2. Press the button to enter IP Address, Subnet Mask, Gateway, or

DNS to set the value. (The selected option is highlighted in blue)

48Using Your Projector