The system will automatically operate in single channel mode, dual channel mode, or flex mode, depending on how the DIMMs are installed.

NOTE: Single channel and unbalanced dual channel memory configurations will result in inferior graphics performance.

●The system will operate in single channel mode if the DIMM sockets are populated in one channel only.

●The system will operate in a higher-performing dual channel mode if the total memory capacity of the DIMMs in Channel A is equal to the total memory capacity of the DIMMs in Channel B. The technology and device width can vary between the channels. For example, if Channel A is populated with two 1-GB DIMMs and Channel B is populated with one 2-GB DIMM, the system will operate in dual channel mode.

●The system will operate in flex mode if the total memory capacity of the DIMMs in Channel A is not equal to the total memory capacity of the DIMMs in Channel B. In flex mode, the channel populated with the least amount of memory describes the total amount of memory assigned to dual channel and the remainder is assigned to single channel. For optimal speed, the channels should be balanced so that the largest amount of memory is spread between the two channels. If one channel will have more memory than the other, the larger amount should be assigned to Channel A. For example, if you are populating the sockets with one 2-GB DIMM, and three 1-GB DIMMs, Channel A should be populated with the 2-GB DIMM and one 1-GB DIMM, and Channel B should be populated with the other two 1-GB DIMMs. With this configuration, 4-GB will run as dual channel and 1-GB will run as single channel.

●In any mode, the maximum operational speed is determined by the slowest DIMM in the system.

Installing DIMMs

CAUTION: You must disconnect the power cord and wait approximately 30 seconds for the power to drain before adding or removing memory modules. Regardless of the power-on state, voltage is always supplied to the memory modules as long as the computer is plugged into an active AC outlet. Adding or removing memory modules while voltage is present may cause irreparable damage to the memory modules or system board.

The memory module sockets have gold-plated metal contacts. When upgrading the memory, it is important to use memory modules with gold-plated metal contacts to prevent corrosion and/or oxidation resulting from having incompatible metals in contact with each other.

Static electricity can damage the electronic components of the computer or optional cards. Before beginning these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal object.

When handling a memory module, be careful not to touch any of the contacts. Doing so may damage the module.

1.Prepare the computer for disassembly (Preparation for disassembly on page 44).

2.Remove the access panel (Access panel on page 45)

Memory 51

Page 62 Page 64
Page 63
Image 63
HP 800 G1 manual Installing DIMMs
Page 62 Page 64

800 G1 specifications

The HP ProDesk 800 G1 is a powerful and versatile desktop computer designed for business and professional use. Released as part of HP's ProDesk series, this model is known for its reliability, performance, and advanced features, making it an ideal choice for various office environments.

One of the standout characteristics of the HP ProDesk 800 G1 is its robust performance. Equipped with Intel's 4th generation Core processors, users can choose from a range of options including Core i3, i5, and i7, ensuring that there is a suitable option for tasks ranging from basic office applications to more demanding workloads such as graphic design and data analysis. The desktop supports up to 32GB of DDR3 RAM, enabling multitasking capabilities that allow users to run multiple applications simultaneously without performance degradation.

Storage options on the HP 800 G1 are flexible, including traditional hard disk drives (HDD) and solid-state drives (SSD). The inclusion of SSDs significantly enhances system responsiveness and boot times, making it a great option for users who require quick access to files and applications. Additionally, with varying storage capacities available, users can choose a configuration that best fits their data requirements.

Connectivity is another area where the HP ProDesk 800 G1 excels. It features multiple USB ports, including USB 3.0 for faster data transfer speeds, along with legacy ports such as USB 2.0. The desktop is also equipped with DisplayPort and VGA outputs for versatile display options, allowing users to connect multiple monitors for enhanced productivity. Furthermore, it includes Ethernet for reliable wired network connections and can support wireless connectivity options for added convenience.

In terms of security, the HP ProDesk 800 G1 has several built-in features, such as HP Client Security and TPM (Trusted Platform Module) for hardware-based encryption. This ensures that sensitive data remains protected, making it suitable for businesses that prioritize data security.

The design of the HP ProDesk 800 G1 is both functional and aesthetically pleasing. Its compact form factor allows for easy placement in limited spaces, while the tool-less design simplifies upgrades and maintenance. Additionally, HP’s commitment to energy efficiency is evident in this model, with ENERGY STAR certification ensuring that it operates in an environmentally friendly manner.

Overall, the HP ProDesk 800 G1 stands out as a reliable desktop computer that combines performance, security, and expandability, making it a smart investment for any business looking for a robust computing solution.
Top Page Image Contents