Resetting the password jumper

CAUTION: If you enable the stringent security feature in Computer Setup and you forget the setup password or the power-on password, the computer is inaccessible and can no longer be used.

Enabling the stringent password disables the ability to reset the password by moving the jumper on the system board.

If you lose or forget the password, the system board must be replaced. This scenario is not covered under warranty.

To prevent the computer from becoming permanently unusable, record your configured setup password or power-on password in a safe place away from your computer. Without these passwords, the computer cannot be unlocked.

To disable the power-on or setup password features, or to clear the power-on or setup passwords, complete the following steps:

1.Shut down the operating system properly, then turn off the computer and any external devices, and disconnect the power cord from the power outlet.

2.With the power cord disconnected, press the power button again to drain the system of any residual power.

WARNING! To reduce the risk of personal injury from electrical shock and/or hot surfaces, be sure to disconnect the power cord from the wall outlet, and allow the internal system components to cool before touching.

CAUTION: When the computer is plugged in, the power supply always has voltage applied to the system board even when the unit is turned off. Failure to disconnect the power cord can result in damage to the system.

Static electricity can damage the electronic components of the computer or optional equipment. Before beginning these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal object. See the Safety & Regulatory Information guide for more information.

3.Remove the access panel.

4.Locate the header and jumper.

NOTE: The password jumper is green so that it can be easily identified. For assistance locating the password jumper and other system board components, see the Illustrated Parts & Service Map (IPSM). The IPSM can be downloaded from http://www.hp.com/support.

5.Remove the jumper from pins 1 and 2.

6.Place the jumper on either pin 1 or 2, but not both, so that it does not get lost.

7.Replace the access panel and reconnect the external equipment.

8.Plug in the computer and turn on power. Allow the operating system to start. This clears the current passwords and disables the password features.

9.Shut down the computer, unplug the power, and disconnect the external equipment.

250 Chapter 11 Password security and resetting CMOS

Page 261 Page 263
Page 262
Image 262
HP 800 G1 manual Resetting the password jumper
Page 261 Page 263

800 G1 specifications

The HP ProDesk 800 G1 is a powerful and versatile desktop computer designed for business and professional use. Released as part of HP's ProDesk series, this model is known for its reliability, performance, and advanced features, making it an ideal choice for various office environments.

One of the standout characteristics of the HP ProDesk 800 G1 is its robust performance. Equipped with Intel's 4th generation Core processors, users can choose from a range of options including Core i3, i5, and i7, ensuring that there is a suitable option for tasks ranging from basic office applications to more demanding workloads such as graphic design and data analysis. The desktop supports up to 32GB of DDR3 RAM, enabling multitasking capabilities that allow users to run multiple applications simultaneously without performance degradation.

Storage options on the HP 800 G1 are flexible, including traditional hard disk drives (HDD) and solid-state drives (SSD). The inclusion of SSDs significantly enhances system responsiveness and boot times, making it a great option for users who require quick access to files and applications. Additionally, with varying storage capacities available, users can choose a configuration that best fits their data requirements.

Connectivity is another area where the HP ProDesk 800 G1 excels. It features multiple USB ports, including USB 3.0 for faster data transfer speeds, along with legacy ports such as USB 2.0. The desktop is also equipped with DisplayPort and VGA outputs for versatile display options, allowing users to connect multiple monitors for enhanced productivity. Furthermore, it includes Ethernet for reliable wired network connections and can support wireless connectivity options for added convenience.

In terms of security, the HP ProDesk 800 G1 has several built-in features, such as HP Client Security and TPM (Trusted Platform Module) for hardware-based encryption. This ensures that sensitive data remains protected, making it suitable for businesses that prioritize data security.

The design of the HP ProDesk 800 G1 is both functional and aesthetically pleasing. Its compact form factor allows for easy placement in limited spaces, while the tool-less design simplifies upgrades and maintenance. Additionally, HP’s commitment to energy efficiency is evident in this model, with ENERGY STAR certification ensuring that it operates in an environmentally friendly manner.

Overall, the HP ProDesk 800 G1 stands out as a reliable desktop computer that combines performance, security, and expandability, making it a smart investment for any business looking for a robust computing solution.
Top Page Image Contents