HP 800 Network Access Controller manual Mount the Unit, Rack Mounting the ProCurve NAC

Quick Install

Installing the Appliance

2. Mount the Unit

After determining the configuration and preparing the site, you are ready to mount the ProCurve NAC 800 appliance in a stable location. The ProCurve NAC 800 unit can be mounted in a rack or cabinet

Wa r n i n g	For safe operation, please read the mounting precautions on
	page 2-3, before mounting a switch.

Quick Install

E q u i p m e n t C a b i n e t

N o t e

Rack Mounting the ProCurve NAC 800

The ProCurve NAC 800 appliance is. designed to be mounted in any EIA- standard 19-inch telco rack or communication equipment cabinet.

The 12-24 screws supplied with the unit are the correct threading for standard EIA/TIA open 19-inch racks. If you are installing the unit in an equipment cabinet such as a server cabinet, use the clips and screws that came with the cabinet in place of the 12-24 screws that are supplied with the unit.

Complete step 1, and plan which four holes you will be using in the cabinet and install all four clips. Then proceed to step 2.

1.Use a #1 Phillips (cross-head) screwdriver and attach the mounting brackets to the ProCurve NAC unit with the included 8-mm M4 screws.

Figure 3. ProCurve NAC 800 with mounting brackets

2-6