Connecting to the HP camera dock

NOTE The camera dock does not work without AC power. Be sure to use ONLY the HP AC adapter and the cables that came with the camera dock.

1Follow the setup instructions provided with the HP camera dock. This includes installing the Camera Dock Insert onto the dock, installing rechargeable batteries in the camera, connecting the AC power source, and connecting the camera dock to a computer, printer, and/or television.

2 Remove the dock plug from the bottom of your camera. Also remove any cables that are connected to the camera.

3 Place the camera in the HP camera dock with the rear of the camera facing the front of the camera dock.

The camera dock has three I/O connectors on the back:

z

—Connects to the television

z—Connects directly to HP USB

DeskJet and Photosmart printers

z —Connects to your computer

There is a sliding door over the computer and printer connectors that

prevents you from selecting both connectors at the same time (the camera dock is not a USB hub).

44

hp photosmart 812 user’s manual