HP 8300 manual Updating Smbios Information, Setup Field Name Comment Label

Updating SMBIOS Information

When replacing the system board, you must reprogram the SMBIOS information on the affected computer. Failure to reprogram the board will result in eventual failure, such as an activation failure (need to reactivate the system) or a system recovery failure.

To update SMBIOS information in Computer Setup:

1.Turn on or restart the computer.

2.Press Esc while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen.

NOTE: If you do not press Esc at the appropriate time, you must restart the computer and again press Esc when the monitor light turns green to access the utility.

3.Press F10 to enter Computer Setup.

4.Go to Security > System ID’s.

5.If necessary, press Ctrl+A to initiate edit mode.

6.Edit the fields listed. If the feature byte has data or is not editable, then it was not cleared and cannot be edited.

System ID Setup Page

Setup Field Name	Comment	Label
Product Name	Enter the Model name/number or marketing name.	Flexbuild
Serial Number	Enter the Serial Number of Unit.	Support
SKU Number	Enter the SKU or Product Number including Localization Code.	Support
Asset Tag	Enter the 18-byte identifier assigned to the computer.	Support
Feature Byte	Enter the Feature Byte string. The feature byte string is case sensitive.	Flexbuild
	The label includes spaces after every four characters. You can enter or ignore
	these spaces – their only purpose is to help with data entry. There is a
	character limitation of 40 bytes per line. When you reach this limit, go to the
	next line to continue data entry. BIOS ignores the spaces and lines.
	If you make an error during data entry, the data will not validate, and the
	computer asks you to correct your data input.
Build ID	The Build ID of the unit.	Flexbuild

System board 99