HP 945 manual Processing, Charging, Flash, Focus TOO FAR, Close

Message	Possible cause	Solution
PROCESSING...	The camera is	Wait a few seconds for the
	processing data,	camera to finish
	such as saving	processing before taking
	the last picture	another picture or pressing
	you took.	another button.
CHARGING	The camera is	It takes longer to charge
FLASH	recharging the	the flash when the
	flash.	batteries are low and in
		dark scenes. If you see this
		message a lot, you may
		need to replace or
		recharge the batteries.
FOCUS TOO FAR	The focus	z Set the camera to
and blinking	distance is	NORMAL focus.
	beyond where	z Move closer to the
	the camera can	subject (within the range
	focus in MACRO	of MACRO		focus -
	mode.	see page 36).
FOCUS TOO	The focus	Move further away from
CLOSE	distance is closer	the subject (within the
	than the camera	range of MACRO		focus -
	can focus in	see page 36).
	MACRO mode.
Blinking	The focus	Set the camera to
	distance is closer	MACRO	focus or move
	than the camera	farther away.
	can focus without
	being in
	MACRO mode.

106 HP Photosmart 945 User’s Manual