![](/images/new-backgrounds/1308021/308021169x1.webp)
Focus Assist Light
Sometimes in
1In the Setup menu (page 83), select Focus Assist.
2In the Focus Assist
3Press OK to save the setting and return to the Setup menu.
NOTE HP recommends leaving this
setting at Auto, since turning it off hinders the ability of the camera to focus correctly in low light.
LCD Brightness
This setting lets you adjust the brightness of the Image Display. By default, the Image Display is optimized for indoor use. You can use this setting to increase the brightness and contrast for better outdoor viewing.
NOTE If you use the Outdoor setting, the image may appear overexposed when viewing it on the camera indoors.
1In the Setup menu (page 83), select LCD Brightness.
2In the LCD Brightness
3Press OK to save the setting and return to the Setup menu.
Chapter 6: Using the Setup Menu | 85 |