NOTE If you have rechargeable batteries, you can use the optional HP Photosmart 8881 camera dock or the optional HP AC power adapter to recharge the batteries while they are in the camera. For more information about these optional accessories, see Purchasing Camera Accessories on page 126.
Installing the Memory Card
1With the camera turned off and
the back of the camera facing you, open the memory card door by
sliding the door to the right.
2 Insert the memory card, making sure that it clicks into place.
3 Close the memory card door.
To remove the memory card, turn the camera off and open the memory
card door, then push the memory card in and it will spring outward from the slot.
Turning on Power
Turn the camera on by sliding the
ON/OFF switch to the right and then releasing it.
The lens extends, the Image Display turns on, and the Power/Memory
light turns on solid green.
NOTE If the Power/Memory light is blinking red, the batteries are very low, and the camera will shut down soon. Replace or recharge the batteries, or use the optional HP AC adapter to power the camera.
Chapter 1: Getting Started | 17 |
