HP 945 manual Using the Pop-up Flash, To change the flash setting, press, Reduction, Flash on

Using the Pop-up Flash

NOTE The flash will not work while recording video clips.

The flash is turned off and will not fire until you manually pop it up by sliding the pop-up flash release on top of the camera. When the flash is popped-up, it begins to charge and is automatically set to the AUTO FLASH setting.

	Av
OFF	Tv
	AUTO

To change the flash setting, press the

Flash button on the back of the camera until the desired setting appears on the active display. The following table describes the different flash settings.

NOTE If you change the flash setting, the camera will remain in that setting

until you change it or turn off the camera.

MF

Icon Setting Description

AAUTO FLASH The camera measures light and uses the flash if necessary.

AAUTO WITH The camera measures light and uses the RED-EYEflash with red-eye reduction if necessary

REDUCTION	(see Note below for further description of
	red-eye reduction).
FLASH ON	The camera always flashes. If the light is
	behind your subject, you can use this
	setting to increase the light on the front of
	your subject. This is called “fill-flash.”

32 HP Photosmart 945 User’s Manual