Single-Ended SCSI-2 Bus Configuration Constraints | HP A165890669

Introduction

Single-Ended SCSI-2 Bus Configuration Constraints

For the single-ended SCSI-2 bus, HP-UX supports only one of each type of removable- media disk drive (i.e., floppy disk, CD-ROM, or magneto-optical drives) and two of the same type tape devices (i.e., 4-mm DDS tape drives or 9-track tape drives), per SCSI bus. You may connect no more than seven SCSI-2 devices to each single-ended SCSI-2 bus.

Table 1±1 shows the configuration constraints for each single-ended SCSI-2 device type. You may connect no more than seven SCSI-2 device IDs to each single-ended SCSI-2 bus. Some SCSI-2 devices use more than one SCSI-2 drive address. Each address must be accounted for in the maximum number of SCSI-2 devices allowed.

CAUTION: Do not connect single-ended SCSI-2 devices to a differential SCSI-2 bus or differential SCSI-2 devices to a single-ended SCSI-2 bus. Connecting a SCSI-2 device to the wrong SCSI-2 bus can cause system failure.

1±13

Image 23

HP A165890669 manual Single-Ended SCSI-2 Bus Configuration Constraints

Contents

HP 4x Speed CD±ROM Disk Drive Users Guide 10 9 8 7 6 5 4 3 2 Contents Maintenance and Troubleshooting Using your CD±ROM Drive Appendix B Scsi Connector Pinout Appendix a Safety and Regulatory Statements Figures Audience Safety and Regulatory Statements Related Manuals Installation Notice E0895 First Printing Problems, Questions, and SuggestionsRevision History Edition Literal values Documentation Conventions Chapter ±1. HP 4x Speed CD±ROM Drive General Description Major Features of the CD±ROM Drive Humidity TemperatureCD±ROM Drive Environmental Requirements Altitude ±2. HP 4x Speed CD±ROM Physical Specifications CD±ROM Drive Physical Specifications Minimum Requirements Preparing to Install the CD±ROM DriveVerifying Kit Contents Tools Required Set the SCSI±2 Address Address Jumpers ±3. SCSI±2 Address Settings Usr/sbin/ioscan ±d sdisk Return Prepare the SystemEtc/ioscan ±d scsi Return Ioscan No hardware found # /etc/shutdown ±h Return Single-Ended SCSI-2 Bus Configuration Constraints Maximum Number of SCSI-2 Devices per bus Single-Ended SCSI-2 DevicesType of Device Allowed SCSI-2 Bus Termination Guidelines Power Off the Workstation and any Peripherals Using Your CD±ROM Drive Device Your CD±ROM Drive ConfigurationScsi ID and Device File Information for HP±UX ±1. CD±ROM Drive Controls and Features Controls and Features of the CD±ROM Drive Control/Feature Purpose Media Description Using the CD±ROM Drive ±2. CD±ROM Disc Tray Disc Tray Description Loading a CD±ROM Disc in a Horizontally Mounted Drive Unloading a CD±ROM Disc in a Horizontally Mounted Drive ±5. Inserting a CD±ROM Disc Vertical Mount Loading a CD±ROM Disc in a Vertically Mounted Drive ±10 Unloading a CD±ROM Disc in a Vertically Mounted Drive ±11 Mounting a CD±ROM DiscMkdir /cdrom Return ±12 Unmounting a CD±ROM DiscCd /cdrom Return ±13 ±14 Reading the Busy Light Maintenance and Troubleshooting Caring for the CD±ROM Discs Etc/ioscan Return TroubleshootingCheck the Address Settings for Single±Ended Drives Screen similar to the following appears Usr/sbin/ioscan ±d sdisk Return Check the Hardware Installation Recheck the Address Settings # man cstm Return # man mstm Return # man xstm Return Verify the System Operation using SupportWave Following screen appears Cstm verify all Return When you see the prompt shown above, type the following Description Part Number CD±ROM Drive A4325±60001 Removal and Replacement ProceduresField Replaceable Units Removing and Replacing the CD±ROM Drive Appendix a Canadian Department of Communications CDC Emissions RegulationsFederal Communications Commission FCC Regulation On Noise Declaration For Machines ±3. Gsgv Emissions Regulations ComplianceAcoustics Electrostatic Discharge ESD Precautions Laserturvallisuus Loukan 1 Laserlaite Klass 1 Laser Apparat Laser Safety Statement For U.S.A. Only IEC 825 Class Laser Labels Warnung Appendix B Order Number A1658±90669 Edition E0895