Using Your CD±ROM Drive
Unloading a CD±ROM Disc in a Horizontally Mounted Drive
Perform the following steps to unload a disc from the CD±ROM drive:
1.Press the eject button to eject the disc tray from the drive. If the drive is in use, you must unmount the disc to eject the disc tray. The emergency eject feature allows you to eject the disc tray if the normal procedure fails. See Table 2±1.
NOTICE: You must unmount the disc before ejecting it from the drive. Refer to the subsection, ªUnmounting a CD±ROM Disc,º for instructions on unmounting a disc.
2.Wait until the drive has fully ejected the disc tray, then remove the disc from the tray as shown in Figure 2±4. Be careful to touch only the edges of the disc.
Figure 2±4. Removing the CD±ROM Disc From the Disc Tray (Horizontal Mount)
3.To close the Disc Tray, push the front of the disc tray gently towards the drive until it closes by itself.