3.When you see the >> prompt shown above, type the following:
R RETURN
The following messages and a graphics test window appear:
Verification of (2/0/1.5.0) has completed. Result status ± (Success). Verification of (2/0/1.6.0) has completed. Result status ± (Success). Verification of (CPU) has completed. Result status ± (Success).
Verification of (FPU) has completed. Result status ± (Success). Verification of (2/0/2) has completed. Result status ± (Success). Verification of (0/0/0) has completed. Result status ± (Success).
4. To return the CSTM> prompt, press RETURN .
5.To exit the Support Tools Manager, enter the following:
CSTM> exit RETURN
If any tests failed, further diagnosis is necessary by qualified service personnel.
3±11