Using Your CD±ROM Drive
Unloading a CD±ROM Disc in a Vertically Mounted Drive
1.Press the eject button to eject the disc tray from the drive. If the drive is in use, you must you must unmount the disc to eject the disc tray. The emergency eject feature allows you to eject the disc tray if the normal procedure fails. See Table 2±1.
NOTICE: You must unmount the disc before ejecting it from the drive. Refer to the subsection, ªUnmounting a CD±ROM Disc,º for instructions on unmounting a disc.
2.Press down gently against the spring tension of disc holders A and B and swing the top of the disc away from disc holder C, as shown in Figure 2±6
3.Remove the disc from disc holders A and B.
4.To close the Disc Tray, push the front of the disc tray gently towards the drive until it closes by itself or press the Load/Eject button.
Disc Holder A | Disc Holder C |
|
Disc Holder B
