A screen similar to the following appears:
H/W Path Description Status
====================================
1.0.0 | graphics | ok(0x577) |
2.0.1 | scsi | ok(0x7071) |
2.0.1.2.0 | disk | ok(0x202) |
2.0.2 | lan | ok(0x7072) |
2.0.3 | hil | ok(0x7073) |
2.0.4 | serial | ok(0x7075) |
2.0.5 | serial | ok(0x7075) |
2.0.6 | parallel | ok(0x7074) |
2.0.7 | scsi | ok(0x707c) |
2.0.7.6.0 | disk | ok(0x101) |
Look under the H/W Path heading for device paths beginning with the sequence 2.0.1. The sequence 2.0.1 denotes single±ended scsi controller. The number following 2.0.1 is the address setting for a single±ended device on that controller. For example, the listing
2.0.1.2.0in the sample device list tells us that there is a single±ended device currently using address 2.
3±4
