6Connect the cables to the audio system.

7Connect the front, rear, side, and center speakers to the subwoofer. Refer to the speaker documentation.

8Turn on the computer.

NOTE: Always turn on the computer before you turn on the speaker system.

9Plug in the speaker system power.

10Turn on the speaker system.

11After the speakers are connected to the computer, configure the audio software for sound output for your computer model. See “Configuring Speaker and Sound Options.”

￿Type 6: See “Configuring Audio Output with Sound Effect Manager.”

￿Type 6 — multi-streaming: See “Configuring Audio Output with Realtek HD Sound Effect Manager.”

The following diagram shows a typical 7.1 audio installation:

Connecting Speakers or Microphone 27