Connecting more than one display
You can connect more than one display device (CRT monitor, flat panel monitor, TV, and so on) to the computer at a time (select models only). You can quickly change which device displays the computer desktop by pressing Alt+F5. Each time you press Alt+F5, the computer desktop appears on the next device. If pressing Alt+F5 does not work, restart the computer and try again.
Using the Windows Media Center Setup for Optional Setup of Your TV Display
If your TV connects to the computer with a composite or
The following procedure describes what to do within the Windows Media Center setup, and how to use the Windows Desktop Properties window to adjust the settings for your TV display:
NOTE: The type of video card on your computer determines how the computer selects the
1Press the Windows Media Center Start button 
on the remote control. Or with your mouse, click the Windows Start Button on the taskbar, and then click Windows Media Center.
2From the Tasks menu, click settings, and then click TV.
3Click Configure Your TV or Monitor to go to the Display Configuration screen.
4Click Next.
5Select your preferred display, and then click Next.
6Select the display type and connection type for your TV display:
If you select the Composite or
Click Next which will take you to the screen to optimize your display.
Select the appropriate setting, and then click Next.
When you have adjusted all the display settings, click Finish this Wizard.
If you select the options DVI, VGA, or HDMI or Component (YPbPr):
Continue to select the appropriate settings, then click Next.
When you have adjusted all the display settings, click Finish this Wizard.
7Close or minimize the Windows Media Center window.
