Chapter 3

Panorama paper

Photo sticker paper

For a full list of supported paper sizes, see Specifications.

To load paper

1.Open the output and input trays, and pull out the input tray extension.

2.Load up to 20 sheets of paper with the print side or glossy side facing the front of the printer. When loading, slide the paper to the left side of the input tray and push the paper down firmly until it stops.

Note If you are using panorama photo paper, only load up to 10 sheets. If you are using photo sticker paper, only load a single sheet at a time.

3.Move the paper-width guide to the left to fit close to the edge of the paper without bending the paper.

To change the paper type

1.Remove any memory cards, then press or.

2.Select Preferences, and then press OK.

3.Select Paper type, and then press OK.

4.Use or to select a paper type:

HP Advanced Photo Paper (default)

HP Premium Photo Paper

Other Photo

Other Plain

5.Press OK.

14

HP Photosmart A510 series

Page 17
Image 17
HP A510 manual To load paper, To change the paper type