7.Remove the two Mylar screw covers (1) and the four Torx T8M2.0×6.0 screws (2) that secure the display assembly to the computer.
8.Turn the computer
9.Open the computer.
CAUTION: The display assembly will be unsupported when the following screws are removed. To prevent damage to the display assembly, support it before removing the screws.
10.Remove the two Torx8 T8M2.5×6.0 screws (one at each hinge) (1) that secure the display assembly hinges to the computer.
11.Lift the display assembly straight up to remove it (2).
Component replacement procedures 75
