Display assembly

Description

Spare part number

 

 

12.1-inch, WXGA AntiGlare display assembly

 

 

 

With a webcam

492576-001

 

 

Without a webcam

492575-001

 

 

Display bezel (includes HP logo and computer model number label)

 

 

 

For use with models that include a webcam

495022-001

 

 

For use with models that do not include a webcam

495019-001

 

 

Display bezel adhesive

497013-001

 

 

Display Hinge Kit (includes left and right hinges and brackets)

481098-001

 

 

Display panel cable

 

 

 

For use with models that include a webcam

495023-001

 

 

For use with models that do not include a webcam

495021-001

 

 

Microphone

492573-001

 

 

Display enclosure (includes HP logo, wireless antenna transceivers and cables)

 

 

 

With webcam

496490-001

 

 

Without webcam

495020-001

 

 

Before removing the display assembly, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 46).

5.Remove the Bluetooth compartment cover (see Bluetooth module on page 48).

6.Remove the memory module compartment cover (see Expansion memory module on page 50).

7.Remove the hard drive bay cover (see Primary hard drive on page 55).

8.Remove the broadband wireless compartment cover (see WWAN module on page 58).

9.Remove the switch cover and keyboard (see Switch cover and keyboard on page 62). Remove the display assembly:

1.Close the computer and turn it upside down, with the rear panel toward you.

2.Disconnect the wireless antenna cables from the WLAN module (1), and feed them down through the hole (2).

Component replacement procedures 73