2.Remove the following screw covers and screws:

(1)Four rubber screw covers. The rubber screw covers are included in the Rubber Kit, spare part number 481106-001.

(2)Six Torx T8M2.5×6.0 screws.

(3)One Phillips PM2.0×5.0 screw.

(4)One Torx T8M2.0×5.0 screw.

3.Turn the computer right-side up, with the front toward you.

4.Disconnect the TouchPad cable (1), and the fingerprint reader board cable (2) from the system board.

5.Remove the two Torx T8M2.5×6.0 screws (3) and the Phillips PM2.0×6.0 screw (4) that secure the top cover to the computer.

80 Chapter 4 Removal and replacement procedures

Page 88
Image 88
HP NH303EPABA, AS322USABA, NG879UPABA manual