For a copy of the HP Limited Warranty Statement, see the printed documentation that came with the product.

Print and evaluate a print quality report

Print quality issues can occur for a variety of reasons. You might be using the wrong software settings or printing a poor quality source file, or there might be a problem with the printing system in the HP Photosmart. If you are unhappy with the quality of your prints, you can print a print quality report to help you determine if the printing system is working properly.

To print a print quality report

1.Load letter or A4 unused plain white paper into the paper tray.

2.Press the top-left, bottom-left, top-left, and top-left buttons in sequence. The Engineering Menu appears.

3.Press OK to select Manufacturing Menu.

4.Press OK to select reports menu.

5.Press OK to select print-mech tap tests.

6.Press the top-right button until the code displayed changes to 72.

7.Press OK.

The product prints a print quality report that you can use to diagnose print quality issues.

To evaluate the print quality report

1.Check the ink levels shown on the page. If a cartridge shows very low ink levels and you find the print quality unacceptable, consider replacing that ink cartridge. Print quality typically deteriorates as cartridges run out of ink.

NOTE: If the print quality report is not legible, you can check the estimated ink levels from the control panel or HP Photosmart Software.

Print and evaluate a print quality report

49

Maintain the HP Photosmart