Removing the Battery or Plug-In Module

(User-Replaceable)

Required Equipment

None.

Removal Procedure

1.Unplug the ac adapter, if present.

2.Slide forward the module latch slider on the corner next to the module, then swing back the latch to loosen the module.

3.Pull out the module.

4.Slide the latch back into the case.

Figure 2-1. Removing the Battery or Plug-In Module

Reassembly Notes

Important: You must slide the latch forward before you can insert a module.

You can install a battery in either bay. Any other type of module must be installed in the left bay.

HP OmniBook 4100/4150

Removal and Replacement

2-3