System Devices Menu
BIOS Version 2.xx/3.xx: PS/2 Pointing Devices
| Default |
Sets whether internal pointing devices are automatically | Auto |
disabled when an external PS/2 pointing device is detected, or |
|
whether both internal and external devices are active. |
|
Internal Pointing Devices | Enables one or both | Both |
External Fn Key | Sets whether | Enabled |
| interpreted as the Fn key. |
|
IDE Controller | Enables the primary (hard drive) and secondary (optional CD- | Both |
| ROM drive) controllers. |
|
FDD Controller | Enables the floppy drive. | Enabled |
Serial Port | Sets how the serial port is configured by the BIOS (specified | Enabled |
| or automatic). |
|
Base I/O address | Sets the I/O address and interrupt. | 3F8h, IRQ4 |
Infrared Port | Sets how the infrared port is configured by the BIOS (specified | Disabled |
| or automatic). |
|
Mode | Sets the hardware to support SIR (Standard IR), ASK IR | SIR |
| (amplitude shift keyed IR), or FIR (Fast IR) infrared |
|
| communications. (Driver installation required.) |
|
Base I/O address | Sets the I/O address and interrupt. | 2F8h, IRQ3 |
DMA channel | For Fast IR mode, sets the DMA channel. | DMA3 |
Parallel Port | Sets how the parallel port is configured by the BIOS (specified | Enabled |
| or automatic). |
|
Mode | Sets the port to normal, | ECP |
Base I/O address | Sets the I/O address. | 378h |
Interrupt | Sets the interrupt. | IRQ7 |
DMA channel | For ECP mode, sets the DMA channel. | DMA3 |
OmniBook 4100/4150†: | Sets how the audio system is configured by the BIOS | Enabled |
Audio | (specified or automatic). |
|
SB I/O address | Sets the Sound Blaster I/O address. | 220h |
WSS I/O address | Sets the Windows Sound System I/O address. | 530h |
AdLib I/O address | Sets the AdLib synthesizer I/O address. | 388h |
Interrupt | Sets the interrupt. | IRQ5 |
1st DMA channel | Sets the DMA channel for playback. | DMA1 |
2nd DMA channel | Sets the DMA channel for recording. | DMA0 |
Security Menu |
| Default |
User Password Is | Shows if a user password is set. | Clear |
Administrator Password Is | Shows if an administrator password is set. | Clear |
Set User Password | Press ENTER to set, change, or clear user password. |
|
| Password length can be no longer than 8 characters, |
|
Set Administrator | Press ENTER to set, change, or clear administrator password. |
|
Password | This password protects BIOS Setup settings. |
|
Boot | Sets whether a password is required when the computer | Enabled |
| boots. |
|
Resume | If boot security is enabled, sets whether a password is | Enabled |
| required when resuming from a suspended state. |
|
Undock | If boot security is enabled, sets whether a password is | Disabled |
| required when undocking the OmniBook. |
|
Internal Hard Disk Drive | If boot security is enabled, sets whether a password is stored | Disabled |
Lock | on the hard disk. Secures data on the disk if the disk is moved |
|
| to another computer. |
|
Removable Device Boot | Sets whether the floppy drive or other removable device is a | Enabled |
| boot device. |
|
HP OmniBook 4100/4150 | Troubleshooting and Diagnostics |