Find more information

A variety of resources, both printed and onscreen, provide information about setting up and using the HP All-in-One.

•Setup Guide

The Setup Guide provides instructions for setting up the HP All-in-One and installing software. Make sure you follow the steps in the Setup Guide in order.

If you have problems during setup, see Troubleshooting in the last section of the Setup Guide, or see “Troubleshooting and support” on page 17 in this guide.

•Onscreen Help

The onscreen Help provides detailed instructions on features of the HP All-in-One that are not described in this User Guide, including features that are only available using the software you installed with the HP All-in-One.

•www.hp.com/support

If you have Internet access, you can get help and support from the HP Web site. This Web site offers technical support, drivers, supplies, and ordering information.

Load originals and load paper

You can copy or scan up to letter- or A4-size originals by loading them on the glass.

To load an original on the scanner glass

1.Lift the lid on the HP All-in-One.

2.Load your original print side down on the right front corner of the glass.

TIP: For more help on loading an original, refer to the engraved guides along the edge of the glass.

3.Close the lid.

HP All-in-One overview

Find more information

5