The display cable is available using spare part number
17.If it is necessary to replace the display hinges, remove the four silver Phillips PM2.0×3.0 screws (1) that secure each hinge to the display.
18.Remove the display hinges (2) from the display. The display hinges are available using spare part number
19.If it is necessary to replace the wireless antenna transceivers and cables, remove the Phillips PM2.5×3.0 screw (1) that secures each transceiver to the display enclosure.
20.Detach the wireless antenna transceivers (2) from the display enclosure. The transceivers are secured by a foil wrapping.
21.Remove the wireless antenna cables from the clips (3) built into the display enclosure.
Component replacement procedures 55
