Using the ProLiant Guide with HP D2D2504 G1 models

When using the HP ProLiant DL165 G5 guide, be aware of the following HP D2D-specific information:

•The AMD Opteron 2384 2.7GHz (75W), part number 495643-005, is the only processor that is supported.

•The HP D2D has four removable hard disks.

•There is no optical media storage.

•The configuration of the system memory is 8 GB (4 x 2 GB DIMMS PC2-6400). The part number for each 2 GB DIMM is 499276-061.

•The HP D2D is supplied with an HP Smart Array P400 controller (with 512 MB and BBWC) pre-installed. For more information about this card, search on http://www.hp.com/support/ manuals.

◦P400 card: 441823–001

◦512 MB memory: 405835–001

◦BBWC: 398648–001

◦BBWC cable assembly: 409125–001

POST messages and troubleshooting

The HP D2D Web Management Interface is the primary source of troubleshooting information. However, it is not able to capture power-on self-test hardware-related issues. Always refer to the appropriate Maintenance and Service Guide for Power-On Self-Test (POST) information. To view POST messages you will need a system console attached to the HP D2D. Please see the HP D2D Backup System User Guide for more information about connecting and using the system console.

Tasks that are unique to the HP D2D

The following tasks are described in this guide:•How to replace the flash memory module•How to replace the motherboard•How to replace the HP Smart Array RAID controller

Software upgrades

The Web Management Interface is used to upgrade software and also has a link to the HP Support website from where the software must be downloaded. Language Pack upgrades are also available to ensure all updates to screen messages and help text are displayed correctly in all languages.

For more information about the upgrade process and how to use the Web Management Interface, please refer to the Software (Administration) section of the Web Management Interface chapter in the HP D2D Backup System User Guide. See also Related documentation (page 42).

14 Introduction