Using the ProLiant Guide with HP D2D4312 G2 models

When using the HP ProLiant DL370 G6 guide, be aware of the following HP D2D-specific information:

•The CPU is Intel Xeon W5580 (Kit part number 495928-B21 includes Heatsink) – there are two per system.

•The HP D2D has 12 removable hard disks. The 12th disk is an online spare disk. If one of the other disks fails, the online spare disk immediately takes its place.

•The system comes with three RAID controller cards — the HP Smart Array P410i (integrated into the Motherboard and with BBWC) and two HP Smart Array P411 cards (each with 512MB cache module and BBWC). The P411 cards are installed in PCI-e Slots 5 and 6. Part numbers for the P411 card are as follows:

◦HP Smart Array P411/512 MB with BBWC Controller: 462832-B21

◦512 MB memory: 462975-001

◦BBWC: 462976-001

For more information about the HP Smart Array cards, search on http://www.hp.com/support/ manuals.

•The configuration of the system memory is 96 GB (12 x 8 GB DIMMs, 6 per processor). The part number for each 8 GB DIMM is 500662-B21.

•The system has an HP 8Gb Dual Channel PCI-e to Fibre Channel Host Bus Adapter, part number AJ764A.

•The system has an HP NC550SFP Dual Port 10GbE Server Adapter, part number 581201-B21.

•The system has an HP SAS Expander Card, part number 468406-B21, in PCI-e Slot 1.

Figure 2 Rear view of the HP D2D4312

1. Power supplies (two)

5. Fibre Channel card

2. iLO2 Management port (do not use for data)

6. RAID cards

3. LAN ports 3 (required connection) and 4

7. HP SAS expander card

4. 10–Gb Ethernet card with two ports

 

8Introduction