Hardware Upgrades
8.Install the expansion card by sliding the card under the slot cover retention latch then pressing the card down into the slot on the system board.
✎Be sure not to scrape other components in the chassis when installing an expansion card.
Installing an Expansion Card
9.Rotate the slot cover retention latch back in place to secure the expansion card.
10.Connect external cables to the installed card, if needed. Connect internal cables to the system board, if needed. If the card requires audio, connect the audio cable to the connector on the system board labeled “Aux” (located towards the edge of the system board under the power supply cage).
11.Replace the computer cover.
12.Plug in the power cord and and turn on the computer.
13.If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor.
Hardware Reference Guide | www.hp.com |
